OBDSTAR X300 Classic G3 Key Programmer added
FIAT EUROPE PANDA HYBRID 2020-2024 BLADE,
500 HYBRID 2020-2024 BLADE,
NEW DOBLO 2020-2024 BLADE,
LANCIA YPSILON 2020-2024 BLADE,
and BSI (PRE-CODING) DELPHI 70F3632/70F3633(ID46) TYPE 3 (2020- Hybrid) in the newest Fiat IMMO Software V42.97.
This Articel will tell you how to X300 Classic G3 Program Fiat Panda Hybrid 2022 Blade Key AKL
Detail precedure steps
Select IMMO>> FIAT/ALFA ROMEO/…>> BSI (PRE-CODING)
Select the appropriate BSI (PRE-CODING) system
e.g. DELPHI 70F3632/70F3633 (ID46)
Select TYPE 3 (2020-Hybrid)
Insert a new key and turn on the ignition
Ensure the internet connection is established
Then start to read IMMO data, make dear key and program key one by one.
1.Read IMMO data
Input a file name to save the IMMO data
Take a screenshot to save the read Pincode
2.Make Dealer Key
Select the IMMO data file just saved
Put the new key (or key chip) in the key sensing coil
3.Program Key
Input the Pincode just read
Turn on or turn off the ignition according to the device prompts
Wait a while, and the key programming is successful by X300 Classic G3
Finally, turn on the ignition to start the car normally
X300 Classic G3 Packages Offer
SP539 X300 Classic G3
SP539+XNR-SS473-C X300 Classic G3 with ECU Clone License Activated
SP539+XNR-SS473-C+XNR-SS473-B X300 Classic G3 with ECU Clone and Airbag Reset License Activated
SP539-FULL X300 Classic G3 with Full License Activated