Obdstar X300 DP and RFID Adapter Program VW 2011 Touareg All Keys Lost

This post is the guide use Obdstar X300 DP and RFID Adapter Program VW 2011 Touareg All Keys Lost

Detail steps:

Well connect OBDSTAR X300 DP and RFID adapter, VCI adapter with vehicle
Select Diag Program->VW/AUDI/SKODA/SEAT->VW/AUDI/SKODA/SEAT 33.03
Please connect VCI to main unit by USB to keep stability of vehicle communication

Select VW->Program Keys->5 generation immo

First update OBDSTAR RFID adapter to latest version. If X300 DP tablet shows the hardware has been the latest version. Press OK to go back.

Select 5th immo New Touareg->Read Immo Data

Switch ignition on
If all key lost, please turn on the headlight and depress brake, then press (ENT) to continue
communicating
Reading immo data…
Save immo data as BIN format, e.g “KKKKKKKK.BIN”

Press OK to confirm
Select Show IMMO Data
Select bin file just saved
OBDSTAR X300 DP key programmer will display VIN, key number etc information

Select Make Dealer Key and bin file

Put a valid key into RFID and make sure the key is effective, otherwise, the programmed key is unable to start the vehicle
Press YES to continue

After insert first key, the RFID indicator will flash. Then insert second valid key

Written success

Select Program Keys and choose bin file

Note: After recognized by vehicle, the key will be locked and unable to unlock. Continue to go on?
Press YES to continue

Enter key number to be programmed: 2
Press OK
Please turn ignition on, Press ENT to continue
Press OK

Insert new key orderly and turn on ignition switch for smart system, aim backside of key to the key identification mark area and turn OFF->ON to recognize key
(1/2)

succeed to recognize key

key learning mode is ending

Learn success
Test the new key.
Done!

OBDSTAR X300 DP PAD Android Tablet Full Version Plus RFID Adapter for VAG 4th 5th IMMO

http://www.obdstar.co.uk/wholesale/obdstar-x300-dp-pad-full-version-plus-rfid-adapter-for-vag-4th-5th-immo.html

www.obdstar.co.uk

(Visited 229 times, 1 visits today)