OBDSTAR factorye ngineers share us a guide how to use OBDSTAR H110 program dealer key for VW Polo 2013 NEC 24C32.
Here we share with you, hope it can help.
Detail steps:
Connect OBDSTEAR H110 to vehicle by OBD port.
Power on the device.
Select “VEHICLE”
Select “IMMOBILISER”
Select”VW/AUDI/SKODA/SEAT”
Select “VW/ADUI/SKODA/SEAT V33.25”
Select “VW”
Read security code
4 Generation Immo
NEC+24C32 ICM
Make Ordinary Dealer Key.
Reading data …
Please connect RFID with diagnostic device
Please put the new key in RFID adapter.
Reading data …
Generating dealer key…
When you find the LED light on the RFID adapter flash on 3 time,the OBDSTAR H110 Programmer will prompt you “Make Dealer key success”
Kindly Notice:
If you find the warning massage with “Communication Breakdown”.Please check below conditions:
1.Ignition Switch is turned on
2.Mainline is connected
3.Battery has power
4.Is Equipped with this ….